Jeep TrackHawk Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
598 Posts
Discussion Starter · #1 ·
With about 700HP to the wheels, do you guys think the suspension setup it has outlined below will be good enough? These were caught testing on the Nurburgring, giving some slight indication that this could be a very well dialed in suspension.

If you have experience with any similar setups, post about here.

The Jeep Grand Cherokee Trackhawk rides on a short- and long-arm (SLA) independent front suspension with coil springs, Bilstein adaptive damping suspension (ADS), upper- and aluminum lower-control arms (“A” arms), aluminum knuckle, aluminum clevis and hollow stabilizer bar. The rear suspension is a multi-link design with coil spring, Bilstein ADS, aluminum lower control arm, independent upper links (tension and camber), plus a separate toe link, and a hollow stabilizer bar.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top