Jeep TrackHawk Forum banner
1 - 9 of 9 Posts

·
Super Moderator
Joined
·
1,420 Posts
Discussion Starter · #1 ·
I want Red calipers yes I know I can have them painted I have done that a million times. I am just flat tired of leaving my cars in shops specially my Daily Driver. I see on Ebay the adds say will fit TrackHawk and SRT8 Red Brembo Calipers. I know the rotors are bigger on TH but no clue if that means the caliper is also? If SRT Calipers dont fit does anyone know a caliper swap shop? Thanks
 

·
Registered
Joined
·
379 Posts
SRT Brembos

I want Red calipers yes I know I can have them painted I have done that a million times. I am just flat tired of leaving my cars in shops specially my Daily Driver. I see on Ebay the adds say will fit TrackHawk and SRT8 Red Brembo Calipers. I know the rotors are bigger on TH but no clue if that means the caliper is also? If SRT Calipers dont fit does anyone know a caliper swap shop? Thanks
I found this out on the HellCat.org forum, don't know if it will help you:

From the 2018 GC specifications ...

BRAKES
Type Power, single-rate, tandem diaphragm vacuum, anti-lock braking system (ABS)

Front
Rotor size and type
13.0 x 1.3 (330 x 32) vented disc – V-6 13.8 x 1.3 (350 x 32) – EcoDiesel and 5.7-liter V-8
15.0 x 1.34 (380 x 34) vented disc with Brembo six-piston caliper and ABS – SRT 6.4-liter V-8
15.0 x 1.34 (380 x 34) two-piece aluminum hat performance rotor, directionally slotted with Brembo six-piston caliper and ABS – available on SRT model
15.75 x 1.42 (400 x 36) two-piece aluminum hat performance rotor, directionally slotted with Brembo six-piston caliper and ABS – standard on Trackhawk

Caliper size and type
1.89 (48) two-piston pin-slider caliper
6 x 40 six-piston fixed caliper on SRT and Trackhawk

Swept area, (sq. in. / sq. cm)
282 (1,820)
413 (2,666) — SRT
498.6 (3,217) — Trackhawk

Rear
Rotor size and type
13.0 x 0.55 (330 x 14) disc – V-6 13.0 x 0.87 (330 x 22) vented disc – EcoDiesel and V-8
13.78 x 1.10 (350 x 28) disc with Brembo four-piston caliper and single-channel ABS – SRT
13.78 x 1.10 (350 x 28) Performance disc, directionally slotted with Brembo four-piston caliper and single-channel ABS on Trackhawk and available on SRT

Caliper size and type
1.89 (48) single-piston pin-slider caliper
4 x 34 four piston fixed caliper on SRT and Trackhawk

Swept area, (sq. in. / sq. cm)
257 (1,658)
316 (2,039) — SRT and Trackhawk
 

·
Super Moderator
Joined
·
1,420 Posts
Discussion Starter · #3 ·
I found this out on the HellCat.org forum, don't know if it will help you:

From the 2018 GC specifications ...

BRAKES
Type Power, single-rate, tandem diaphragm vacuum, anti-lock braking system (ABS)

Front
Rotor size and type
13.0 x 1.3 (330 x 32) vented disc – V-6 13.8 x 1.3 (350 x 32) – EcoDiesel and 5.7-liter V-8
15.0 x 1.34 (380 x 34) vented disc with Brembo six-piston caliper and ABS – SRT 6.4-liter V-8
15.0 x 1.34 (380 x 34) two-piece aluminum hat performance rotor, directionally slotted with Brembo six-piston caliper and ABS – available on SRT model
15.75 x 1.42 (400 x 36) two-piece aluminum hat performance rotor, directionally slotted with Brembo six-piston caliper and ABS – standard on Trackhawk

Caliper size and type
1.89 (48) two-piston pin-slider caliper
6 x 40 six-piston fixed caliper on SRT and Trackhawk

Swept area, (sq. in. / sq. cm)
282 (1,820)
413 (2,666) — SRT
498.6 (3,217) — Trackhawk

Rear
Rotor size and type
13.0 x 0.55 (330 x 14) disc – V-6 13.0 x 0.87 (330 x 22) vented disc – EcoDiesel and V-8
13.78 x 1.10 (350 x 28) disc with Brembo four-piston caliper and single-channel ABS – SRT
13.78 x 1.10 (350 x 28) Performance disc, directionally slotted with Brembo four-piston caliper and single-channel ABS on Trackhawk and available on SRT

Caliper size and type
1.89 (48) single-piston pin-slider caliper
4 x 34 four piston fixed caliper on SRT and Trackhawk

Swept area, (sq. in. / sq. cm)
257 (1,658)
316 (2,039) — SRT and Trackhawk
thank you. yes i think it helps lol it says the SRT and trachawk use the same calipers. I dont know enough about brakes to know if a larger rotor works on the same caliper. according to this it will. Thank You
 

·
Registered
Joined
·
582 Posts
I don’t think that’s correct because srt8/hellcat front brake pads do not fit the trackhawk front calipers. They are too small. There is a specific trackhawk pad.

The rear rotors and calipers are the same as hellcats.


Sent from my iPhone using Tapatalk
 

·
Super Moderator
Joined
·
1,420 Posts
Discussion Starter · #5 ·
I don’t think that’s correct because srt8/hellcat front brake pads do not fit the trackhawk front calipers. They are too small. There is a specific trackhawk pad.

The rear rotors and calipers are the same as hellcats.


Sent from my iPhone using Tapatalk
oh man thank you for your input. I think I need to just suck it up and let my TH sit at the shop a few days and paint mine red. trying to figure this out is funny. Besides I forgot some of these new cars have special machines to bleed the brakes.
 

·
Registered
Joined
·
65 Posts
Buy some uprated brakes in red. We are develloping adjustments for a 444 mm disks and 12 pot brake calipers for mine. My engineer is designing the brackets right now. We are even thinking of doing 2 calipers on one disk! Only cooling could be a problem then
 
1 - 9 of 9 Posts
Top